H743 60A FC ESC Rere Tapae Rere Pourewa mo Drone Fpv

• MCU: STM32H743VIH6, 480MHz, 1MB RAM, 2MB Flash
• Poari V1.0 IMU: MPU6000 (SPI1) & ICM20602 (SPI4)
• Poari V1.5 IMU: MPU6000 (SPI1) & ICM42605 (SPI4)
• Baro: Infineon DPS310 (I2C2)
• OSD: AT7456E (SPI2)
• Pouaka Pango: turanga kaari MicroSD (SDIO)
• 7x Uarts (1,2,3,4,6,7,8) me te hurihuri i roto.
• 13x PWM putanga (tae atu ki te papa 'LED')
• 2x I2C
• 1x TAEA
• 6x ADC (VBAT, Onāianei, RSSI, Rererere Analog, Vbat2, Cur2)
• 3x nga rama mo te FC STATUS (Kinarangi, Whero) me te tohu 3.3V (Whero)
• 1x SPI3 pakaruhanga
• USB Momo-C(USB2.0)
• 1x JST-SH1.0_8pin tūhono (Vbat/G/Curr/Rx8/S1/S2/S3/S4)
• 1x JST-GH1.25_4pin tūhono (5V/CAN-H/CAN-L/G)
• Whakawhiti Whakataunga Takirua Kamera
• 5V/Vbat te mana tātari ON/OFF pana
• Kei te tautokohia a DJI FPV OSD e tetahi UART e manawapa ana

• Vbat Whakauru: 6~36V (2~8S LiPo)
• BEC: 5V 2A tonu. (Mō.3A)
• LDO 3.3V: Max.200mA
• Karekau he Pūoko o nāianei kua hangaia
• ADC Vbat2 papa tautoko Max. 69V (whakawehe ngaohiko: 1K:20K)
• Te mana pateko: 200mA@5V me te Betaflight, 150mA@5V me ArduPilot

• ArduPilot (ChiBiOS): MATEKH743
• BetaRererangi: MATEKH743
• INAV: MATEKH743

• Whakaeke: 30.5 x 30.5mm, Φ4mm me Grommets Φ3mm
• Rahi: 37 x 38 mm
• Taumaha: 7g

• 1x H743-SLIM
• 6x Silicon grommets M4 ki M3
• 1x JST-SH1.0_8pin taura, 5cm
• 2x JST-SH1.0_8pin tūhonohono
• 1x JST-GH-4P ki JST-GH-4P taura mo CAN tauranga, 20cm

ESC:

Whakaeke: 30.5*30.5mm/M3

Rahi: 43*48.8mm