H743 60A FC ESC Stack Vola Turris Fucus Fpv

• MCU: STM32H743VIH6, 480MHz , 1MB RAM, 2MB Flash
• Tabula V1.0 IMU: MPU6000 (SPI1) & ICM20602 (SPI4)
• Board V1.5 IMU: MPU6000 (SPI1) & ICM42605 (SPI4)
• Baro: Infineon DPS310 (I2C2)
• OSD: AT7456E (SPI2)
• Blackbox: MicroSD card nervum (SDIO)
• 7x Uarts (1,2,3,4,6,7,8) cum constructo-in inversione.
• 13x PWM outputs (including 'LED' codex)
• 2x I2C
• 1x CAN
• 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2)
• 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
• 1x SPI3 effrego
• USB Type-C(USB2.0)
• 1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4)
• 1x JST-GH1.25_4pin iungo (5V/CAN-H/CAN-L/G)
• Dual Camera Inputs switch
• 5V/Vbat potentia percolantur DE/OFF switch
• DJI FPV OSD nullis parcens sustentatur UART .

• Vbat Input: 6~36V (2~8S LiPo)
• BEC: 5V 2A cont. (Max.3A)
• LDO 3.3V: Max.200mA
• Non Current Sensor constructum-in
• Adc Vbat2 adstipulatur codex Max. 69V (dividens intentione: 1K:20K)
• Statica potentia: 200mA@5V cum Betaflight, 150mA@5V cum ArduPilot

• ArduPilot (ChiBiOS): MATEKH743
• BetaFlight: MATEKH743
• INAV: MATEKH743

• Adscendens: 30.5 x 30.5mm, Φ4mm cum Grommets Φ3mm
• Dimensiones: 37 x 38 mm
• Pondus: 7g

• 1x H743-SLIM
• 6x Pii grommets M4 ad M3
• 1x JST-SH1.0_8pin funem, 5cm
• 2x JST-SH1.0_8pin connectors
• 1x JST-GH-4P ad JST-GH-4P funem ad portum CAN, 20cm

ESC:

Adscendens：30.5*30.5mm/M3

Size：43*48.8mm