H743 60A FC ESC Kidhibiti Ndege Stack Fly Tower kwa Drone Fpv

• MCU: STM32H743VIH6, 480MHz , RAM 1MB, Flash 2MB
• Ubao V1.0 IMU: MPU6000 (SPI1) & ICM20602 (SPI4)
• Ubao V1.5 IMU: MPU6000 (SPI1) & ICM42605 (SPI4)
• Baro: Infineon DPS310 (I2C2)
• OSD: AT7456E (SPI2)
• Sanduku Nyeusi: Soketi ya kadi ya MicroSD (SDIO)
• Uarts 7x (1,2,3,4,6,7,8) zilizo na ubadilishaji wa ndani.
• Matokeo ya 13x PWM (pamoja na pedi 'LED')
• 2x I2C
• 1 x UNAWEZA
• 6x ADC (VBAT, Sasa, RSSI, AirSpeed ​​ya Analogi, Vbat2, Cur2)
• LEDs 3x za HALI YA FC (Bluu, Nyekundu) na kiashirio cha 3.3V (Nyekundu)
• 1x SPI3 kuzuka
• USB Type-C(USB2.0)
• 1x kiunganishi cha pini cha JST-SH1.0_8 (Vbat/G/Curr/Rx8/S1/S2/S3/S4)
• Kiunganishi cha pini 1x JST-GH1.25_4 (5V/CAN-H/CAN-L/G)
• Swichi ya Kuingiza Data ya Kamera Mbili
• 5V/Vbat nguvu iliyochujwa KUWASHA/ZIMA swichi
• DJI FPV OSD inasaidiwa na UART yoyote ya ziada

• Ingizo la Vbat: 6~36V (2~8S LiPo)
• BEC: 5V 2A kuendelea. (Upeo wa 3A)
• LDO 3.3V: Max.200mA
• Hakuna Kihisi cha Sasa kilichojengewa ndani
• Pedi ya ADC Vbat2 inasaidia Max. 69V (kigawanyaji cha voltage: 1K:20K)
• Nguvu tuli: 200mA@5V na Betaflight, 150mA@5V na ArduPilot

• ArduPilot (ChiBiOS): MATEKH743
• BetaFlight: MATEKH743
• INAV: MATEKH743

• Kupachika: 30.5 x 30.5mm, Φ4mm na Grommets Φ3mm
• Vipimo: 37 x 38 mm
• Uzito: 7g

• 1x H743-SLIM
• 6x Silicon grommets M4 hadi M3
• Kebo ya pini 1x ya JST-SH1.0_8, sentimita 5
• Viunganishi vya pini 2x JST-SH1.0_8
• Kebo ya 1x JST-GH-4P hadi JST-GH-4P kwa mlango wa CAN, 20cm

ESC:

Ufungaji: 30.5 * 30.5mm/M3

Ukubwa: 43 * 48.8mm